Drive-in racking is ideal for homogeneous products with low levels of turnover and a high number of pallets per article type. This system offers the highest use of available space in terms of both area and height.

Advantages

• Maximum use of available space (85%).
• Elimination of aisles between the racking.
• Rigorous entrance and exit control.

Drive-in Racks:  Racks are accessed from one side only.  Will improve cube utilization, but sacrifices access to deep loads.  Optimum use is with large quantities of the same material or goods are to be stored.

Drive-through Racks:  Same as drive-in, but you will have access to both ends.  This will allow you to store two different products in the same row

Our drive –in / drive-in racking has a number of unique features that increase the efficiency and durability of the racking system:

• GP-5 arm & rail: 6-pin bracket that joins the rail to the rack.
Three arm lengths available to accommodate different pallet overhangs
Pallet support rail whose shape enables pallets to be easily guided into
position and be centered with a minimum loss of space

• Centralizers: GP-5 rail centralizers are installed at the end of the
GP-5 rails in each of the loading aisle. They help to guide the pallet
at the entrance to each aisle.


• Fork Lift Guide Rails & Post Protectors:
Guide rails help protect the racking structure from impact and
damage, and guides the forklift within the bays of the racking system.